:fill(transparent))
White Knight Ultra Pave Quick Dry Paving and Concrete Paint
White Knight Ultra Pave Quick Dry Paving and Concrete Paint with DuraTough® technology is a fast drying acrylic coating designed to refresh and protect concrete surfaces. It delivers a durable finish that resists peeling, cracking and blistering while providing a clean, modern look. Ideal for paths, patios, courtyards and other outdoor areas, this versatile concrete paint adheres to both bare and previously painted concrete, including surfaces coated with oil or water based paints.
Features
- DuraTough® technology with a fast-drying satin finish
- Touch dry in 30 minutes, recoat in 2 hours
- Durable surface protection resists peeling, cracking and blistering
- Water based, low odour formulation for easy application & clean-up
- Ideal for paths, patios, courtyards and garage floors (with Ultra Pave Garage Floor Primer)
- Tintable to a wide range of colours including Taubmans® and COLORBOND®
How to Apply
- For best results, use the recommended White Knight products and follow the step-by-step guide below.
Ensure surface is clean, dry and free from dust, grease and loose material
New concrete must cure for at least 4 weeks
Etch smooth or dense concrete with Ultra Pave Concrete Etcher, then rinse and allow to dry
Remove all flaking or peeling paint from previously painted surfaces
For garage floors or driveways, apply an appropriate primer before painting
Stir thoroughly for 5 minutes before use and re stir during application
Apply 2 coats using brush, roller or spray
On bare concrete, thin first coat with up to 20% water
Apply second coat unthinned
Add Ultra Pave Grip Additive to the second coat where slip resistance is required
Work in sections to maintain a wet edge
Do not apply below 10°C or above 30°C
Applying to unprepared or smooth concrete can result in poor adhesion and reduced durability.
Covers up to 10m² per litre per coat depending on surface
Porous or rough concrete will reduce coverage, especially on the first coat
Touch dry: ~30 minutes
Recoat: after 2 hours
Light foot traffic: after 6–8 hours
Heavy traffic: after 7 days
Dry to touch is not fully cured. Avoid heavy use or vehicle traffic until fully cured to prevent damage.
Where to Use
Colour Range
Tintable to a wide range of colours including Taubmans® and COLORBOND®.
*Due To Colour Variations In All Browser Types, The Displayed Colour Palettes Are A Representation Only Of The Actual Colour. This Should Not Be Used In Deciding The Colour Range Suitable For You Application.
