White Knight Renew Tile And Laminate Primer Paint

How to Apply

• Introduction

  For best results, use the recommended White Knight products and follow the step-by-step guide below.
• 1

  Preparation

  • Ensure surface is clean, dry and free from dust, dirt, soap residue and contaminants

  • Clean thoroughly using White Knight Renew Tile & Laminate Cleaner

  • Treat mould with bleach solution (1 part bleach : 3 parts water)

  • Lightly sand using #240 grit wet & dry sandpaper

  • Rinse thoroughly with clean water

  • Allow surface to fully dry before application

• 2

  Application

  • Stir paint thoroughly for at least 5 minutes before use and during application

  • Apply 1 coat using a high quality microfibre roller

  • Use a zig zag application method for even coverage

  • Finish by lightly rolling in one direction

  Conditions:

  • Do not apply below 10°C or above 30°C

  • Avoid application in high humidity

• 3

  Coverage & Drying Time

  • Touch dry: 1 hour

  • Recoat (with topcoat): after 4 hours

  Note:
  Drying times may be extended in cold, humid conditions, poor ventilation or with heavy film build.