Pave and Deck Grip

200g

White Knight Pave & Deck Grip is an additive designed to improve the slip resistance of White Knight Paving Paint and Ultra Pave. The surface texture helps reduce the occurrence of a slippery surface when wet.

Ideal for use when painting sloping or steep exterior concrete surfaces.

Features:

  • Helps improve slip resistance
  • Provides a rough texture in the painted finish
  • Powder form additive

Suitable Surfaces

White Knight Ultra Pave is suitable for use with White Knight Ultra Pave and Paving Paint.

Safety & First Aid

  • KEEP OUT OF REACH OF CHILDREN.
  • This product is highly flammable. Store and use away from heat and eliminate any source of ignition.
  • Soak any clothes used in water immediately after use as they may self ignite.
  • If swallowed, seek medical advice immediately and show the container or label. Do not induce vomiting.
  • If in eyes, immediately flush with running water for at least 15 minutes. Seek immediate medical attention.
  • Avoid breathing vapour or mist.
  • Use only with adequate ventilation.
  • If on skin, remove contaminated clothing. Wash skin thoroughly with soap and water. Do not use solvents or thinners.
  • Warning - Misuse by concentrating and inhaling contents can be harmful or fatal.
  • For 24 hour medical emergency response in Australia call 1800 807 001 and in New Zealand call 0800 154 666

Preparation

  1. Stir paint thoroughly.
  2. Stir in White Knight Pave & Deck Grip slowly, stirring as you go. For slip reduction approximately 20g or 2-3 heaped scoops per litre is required.
  3. Stir paint regularly during application to prevent it settling.
  4. Apply paint as per label instructions.

Note: For optimal colour and binding in the solvent based White Knight Paving Paint a final finish coat without the additive is recommended. For White Knight Ultra add White Knight Pave and Deck Grip to the final coat.

Application

  1. Stir paint thoroughly.
  2. Stir in White Knight Pave & Deck Grip slowly, stirring as you go. For slip reduction approximately 20g or 2-3 heaped scoops per litre is required.
  3. Stir paint regularly during application to prevent it settling.
  4. Apply paint as per label instructions.

Note: For optimal colour and binding in the solvent based White Knight Paving Paint a final finish coat without the additive is recommended. For White Knight Ultra add White Knight Pave and Deck Grip to the final coat.

Colours

Due to colour variations in all browser types, the displayed colour palettes are a representation only of the actual colour. This should not be used in deciding the colour range suitable for you application.

 

FIND A STORE