Tile and Laminate Cleaner

500ml

White Knight Tile & Laminate Cleaner is a high performance cleaning product formulated for the removal of grease, soap scum and other contamination from ceramic tiles and laminate surfaces.

Ideal for cleaning surfaces before painting with White Knight Tile & Laminate Primer.

Features:

  • High performance
  • Low odour
  • Handy trigger spray pack
  • Water based

Suitable Surfaces

White Knight Tile & Laminate Primer may be used on ceramic tiles, laminate and melamine.

Safety & First Aid

  • KEEP OUT OF REACH OF CHILDREN.
  • This product is highly flammable. Store and use away from heat and eliminate any source of ignition.
  • Soak any clothes used in water immediately after use as they may self ignite.
  • If swallowed, seek medical advice immediately and show the container or label. Do not induce vomiting.
  • If in eyes, immediately flush with running water for at least 15 minutes. Seek immediate medical attention.
  • Avoid breathing vapour or mist.
  • Use only with adequate ventilation.
  • If on skin, remove contaminated clothing. Wash skin thoroughly with soap and water. Do not use solvents or thinners.
  • Warning - Misuse by concentrating and inhaling contents can be harmful or fatal.
  • For 24 hour medical emergency response in Australia call 1800 807 001 and in New Zealand call 0800 154 666

Caution

Eye Contact

Avoid contact with eyes. If contact occurs, flush with water for at least 15 minutes and seek medical advice.

If Swallowed

Do not induce vomiting. Seek medical advice

Environment

  1. Do not pour unwanted paint down the drain. Keep unwanted paint in sealed containers for disposal via special chemical waste collections.
  2. Empty paint containers should be left open in a well ventilated area to dry out. When dry, recycle steel containers via can recycling programs.
  3. Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first.

 

Application

  1. Spray 20cm from the surface and wipe clean with a clean wet sponge or cloth, working a small area at a time. For stubborn stains or grease marks leave on for up to 30 seconds.
  2. Rinse thoroughly with fresh, clean water.
  3. If necessary, repeat cleaning process until all contamination is completely removed.

Clean Up

Clean equipment and brushed with soap and water immediately after use

Colours

Due to colour variations in all browser types, the displayed colour palettes are a representation only of the actual colour. This should not be used in deciding the colour range suitable for you application.

  • Satin White

  • Satin Silver

 

FIND A STORE
Hints and Tips
  • Heavily contaminated surfaces may require use of plastic scouring pads.