Stain Stop Binder

White Knight Prep Rite Stain Stop Binder is a high opacity sealer and primer with excellent stain suppressing and sealing qualities.

Ideal for effectively sealing common problem stains such as nicotine, smoke, water stains, graffiti, grease marks and tannin bleed.

Features:

  • Covers and blocks stains
  • High opacity
  • Binds and grips the surface
  • Excellent coverage and sound base coat
  • Water based, easy clean up
  • Suitable for interior and exterior use
  • May be overcoated with oil and water based paints

Safety & First Aid

  • KEEP OUT OF REACH OF CHILDREN.
  • This product is highly flammable. Store and use away from heat and eliminate any source of ignition.
  • Soak any clothes used in water immediately after use as they may self ignite.
  • If swallowed, seek medical advice immediately and show the container or label. Do not induce vomiting.
  • If in eyes, immediately flush with running water for at least 15 minutes. Seek immediate medical attention.
  • Avoid breathing vapour or mist.
  • Use only with adequate ventilation.
  • If on skin, remove contaminated clothing. Wash skin thoroughly with soap and water. Do not use solvents or thinners.
  • Warning - Misuse by concentrating and inhaling contents can be harmful or fatal.
  • For 24 hour medical emergency response in Australia call 1800 807 001 and in New Zealand call 0800 154 666

Environment

Do not pour unwanted paint down the drain. Keep unwanted paint in sealed containers for disposal via special chemical waste collections.
Empty paint containers should be left open in a well ventilated area to dry out. When dry, recycle steel containers via can recycling programs.
Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first.

Preparation

  1. Remove as much of the stain as possible by washing with an appropriate cleaner, sanding or scraping.
  2. Ensure the surface is thoroughly clean, dry and free from grease, oil, dirt, rust scale and other contaminants.
  3. Sand previously painted and glossy surfaces with 600# abrasive paper.

Application

  1. Stir thoroughly with a broad flat stirrer in a circular lifting motion for at least 5 minutes before use and continue to stir at regular intervals during application.
  2. Apply 1 coat by brush.


Do not use when air or surface temperature is below 10°C or above 30°C or in excessive humidity.

Clean Up

Clean brushes with water immediately after use.

Colours

Due to colour variations in all browser types, the displayed colour palettes are a representation only of the actual colour. This should not be used in deciding the colour range suitable for you application.

  • White

 

FIND A STORE
Hints and Tips
  • Use a drop sheet to cover objects from overspray. Overspray can travel long distances so make sure you cover a wide area.
  • Use masking tape or newspaper to prevent paint from going on areas you don't want it to.
  • Have lots of rags handy for any cleaning.