Tile & Laminate Primer

Tile___lam_primer_1ltr
A revolutionary, water-based primer specially developed to give superior adhesion to ceramic tiles, laminate and melamine surfaces. Quick drying and easy to use, White Knight Tile & Laminate Primer creates the perfect basecoat for White Knight Tile Paint or Laminate Paint.
Suitable Surfaces

Suitable Surfaces

Ceramic wall tiles, laminate and melamine surfaces. Tile & Laminate Primer is not recommended for use on floors or benchtops and is for interior use only.
Preparation

Preparation

CORRECT SURFACE PREPARATION IS CRITICAL TO THE SUCCESS OF THE PROJECT. Using White Knight Tile & Laminate Cleaner, thoroughly clean the surface to be primed, ensuring that it is totally free of grease, soap residues, dirt, polish and other contaminants. Treat any mould with bleach and water. Rinse surface thoroughly with clean water and allow to dry. ANY CONTAMINATION LEFT ON THE SURFACE WILL AFFECT THE PERFORMANCE OF THE PRIMER. For the best result lightly sand melamine and laminate prior to application. Note: Some shower recesses have a clear coating applied. This must be removed prior to coating with White Knight Tile & Laminate Primer.
Application Details

Application Details

Stir thoroughly with a broad, flat stirrer in a circular lifting motion for at least 5 minutes before use. Stir at regular intervals during application. Apply using a high quality brush or roller. Do not use when the air or surface temperature is below 10°C or above 30°C.
Coverage

Coverage

Up to 12 sq. metres per litre depending on the nature of the surface.
Drying Times

Drying Times

Touch dry 1 hour. Overcoat after 4 hours with White Knight Tile Paint or Laminate Paint.
Pack Sizes

Pack Sizes

1 litre.
Health and Safety

Health and Safety

Refer to Material Safety Data Sheet available by request on 131 686.

Homecare

Tile_and_laminate_primer

© White Knight Paints 2005 | Privacy/Disclaimer | Site by Intervision Design