BEFORE SPRAYING: Cover all necessary areas to protect from overspray. It is essential to shake the can for at least one minute after mixing ball rattles to ensure product uniformity. Shake can occasionally during use. Do not use when the air or surface temperature is below 15°C or above 30°C or in excessive humidity. Spray outside or in a well ventilated area away from fire and heaters. Test spray first on a small inconspicuous area to ensure surface compatibility and finish suitability. Hold the can upright approximately 15-20 cm from the surface. Press button firmly. Spray with a smooth sweeping motion. Apply a pre-wetting mist coat followed by a full even coat. Overlap each spray pass. Repeat if necessary. To prevent paint sagging, avoid spraying too close to the surface or spraying too heavy a coat.
AFTER SPRAYING: To clean the nozzle after use and prevent blocking turn the can upside down and press button until only gas escapes.
310g
HANDY HINTThe surface must be thoroughly cleaned and free from grease, oil, dirt, rust, scale and other contaminants. Sand previously painted or glossy surfaces with 600# wet n dry abrasive paper. Clean and allow to dry before painting. Timber and bare ferrous metal should beprimed with White Knight Super Primer before painting. For galvanised iron and other non-ferrous metal surfaces use White KnightSLS Etch Primer.
Download the Squirts Fact Sheet
White Knight GLOW SAFE is a high quality water based coating that glows in the dark for at least 8 hours*. The ideal choice for safety marking of signs, walkways, stairs, in factories, warehouses and hospitals. See also www.safetypaints.com.au
© White Knight Paints 2005 | Privacy/Disclaimer | Site by Intervision Design
