Marble Web Top Coat

Marble_web_spray
Marble Web top coat provides an elegant marble finish
Suitable Surfaces

Suitable Surfaces

The Marble Web Top Coat can be applied to appropriately painted interior and exterior surfaces to achieve the stunning look of a marble finish.
Preparation

Preparation

The surface must be thoroughly cleaned and free from grease, oil, dirt and other surface contaminates.. BEFORE SPRAYING Cover all necessary areas to protect from overspray. It is essential to shake the can for at least one minute after mixing ball rattles to ensure product uniformity. Shake can occasionally during use. Do not use when the air or surface temperature is below 15°C or above 30°C or in excessive humidity.
Application Details

Application Details

Spray outside or in a well ventilated area away from fire and heaters. Test spray first on a small inconspicuous area to ensure surface compatibility and finish suitability. Hold the can upright approximately 25cm - 60cm from the surface. It is recommended that you practise first, before spraying onto your prepared base coat. Varying the spray distance has the effect of changing the web pattern produced. Sweep across the object spraying quickly. An alternative method is to spray the Marble Web Top Coat into the air and let the paint fall onto the object. When desired pattern is achieved, the job is finished. No top coat is required.
Coverage

Coverage

none provided
Drying Times

Drying Times

Touch dry 10 minutes. Drying times will be slower in cold or humid conditions, in the absence of ventilation or where heavy film builds are applied.
Health and Safety

Health and Safety

Refer to Material Safety Data Sheet available by request on 131 686.
Pack Sizes

Pack Sizes

150g spray
Handyhint HANDY HINT

HANDY HINT

Can be applied over most painted surfaces.

Colour_icon
Colour Palette

Paint Effects

Marbletopcoat_closeup

© White Knight Paints 2005 | Privacy/Disclaimer | Site by Intervision Design