Glass Frosting

Glass_frosting_spray
White Knight Glass Frosting is easy to use and gives a smooth frosted effect to any glass surface. ideal for transforming vases, bottles, ornaments and other small household items. Create the etch look on mirrors, glass doors and windows. Have fun with stencils.
Suitable Surfaces

Suitable Surfaces

Interior glass surfaces. For interior use only. When using on windows, table tops etc, apply to side of glass which is protected from exposure to the elements or wear and tear.
Preparation

Preparation

Glass must be thoroughly cleaned and dry before painting.

BEFORE SPRAYING Cover all necessary areas to protect from overspray. It is essential to shake the can for at least one minute after mixing ball rattles to ensure product uniformity. Shake can occasionally during use. Do not use when the air or surface temperature is below 15°C or above 30°C or in excessive humidity.


Application Details

Application Details

Spray outside or in a well ventilated area away from fire and heaters. Test spray first on a small inconspicuous area to ensure surface compatibility and finish suitability. Hold the can upright approximately 20-30 cm from the surface. Press button firmly. Spray with a smooth sweeping motion. Apply a pre-wetting mist coat followed by a full even coat. Overlap each spray pass. Repeat if necessary. To prevent paint sagging, avoid spraying too close to the surface or spraying too heavy a coat.
Drying Times

Drying Times

Touch dry 20 minutes. Re-Coat: After 10 minutes. Leave for one hour before handling.

Clean Up

Clean Up

Overspray can be removed while still wet with mineral turps.
Pack Sizes

Pack Sizes

150g can
Health and Safety

Health and Safety

Refer to Material Safety Data Sheet, available by request on 131 686.
Handyhint HANDY HINT

HANDY HINT

Can be used for decorative effects and safety. It can identify the existence of a glass door, and for security as it prevents viewing of valuables through a glass window.
To remove a child proof cap insert a screwdriver in the cap and lever it up.
The horizontal setting is used when spraying up and down and press button until only gas escapes.
To clean nozzle after use and prevent blocking turn the can upside down and press button until only gas escapes.

Paint Effects

Frosting-1

© White Knight Paints 2005 | Privacy/Disclaimer | Site by Intervision Design